[Free] 2018(Aug) Dumps4cert Cisco 300-160 Dumps with VCE and PDF Download 161-170

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug Cisco Official New Released 300-160
100% Free Download! 100% Pass Guaranteed!

Designing Cisco Data Center Unified Computing

Question No: 161 – (Topic 1)

Which Cisco energy management tool provides efficiency, monitoring, measuring, and fine- tuning of power usage?

1. Cisco Power Calculator

2. Cisco EnergyWise

3. Cisco UCS PowerTool

4. Cisco Fabric Manager

Answer: B

Question No: 162 – (Topic 1)

When multicast traffic is a required design element, why is the Cisco UCS 6248UP a better choice than the Cisco UCS 6140XP?

1. Cisco UCS 6140XP does not allow multicast traffic propagation.

2. Cisco UCS 6140XP does not support IGMP snooping on uplink interfaces.

3. Cisco UCS 6248UP employs separate unicast and multicast egress queues.

4. Cisco UCS 6248UP supports PIM dense mode rendezvous points.

5. Cisco UCS 6248UP supports dynamic queue mapping of IGMP v3 requests.

Answer: C

Question No: 163 – (Topic 1)

Refer to the screenshot in Exhibit 5. There are two interfaces in Port Channel. Assuming you are creating this Port Channel on a Cisco UCS 6248, how many additional interfaces can be added to the Port Channel?

1. 4

2. 6

3. 8

4. 14

5. 18

Answer: B Explanation:

Exhibit 5 shown below:

An uplink Ethernet port channel allows you to group several physical uplink Ethernet ports (link aggregation) to create one logical Ethernet link to provide fault-tolerance and high- speed connectivity. In Cisco UCS Manager, you create a port channel first and then add uplink Ethernet ports to the port channel. You can add up to eight uplink Ethernet ports to a port channel.

Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2- 0/b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_cha pter_0101.html#concept_15B479F615A44205BB3851188C06F328

Question No: 164 – (Topic 1)

Which two methods are valid to configure VLANs on a Cisco UCS cluster? (Choose two.)

1. globally per Cisco UCS cluster

2. by using Cisco UCS Fabric Interconnect

3. by using VTP

4. by using CFS

5. by using vPC domain configuration

Answer: A,B

Question No: 165 – (Topic 1)

Which two customer challenges does Cisco DCNM address? (Choose two.)

1. Cisco DCNM proactively monitors the overall health of the data center network.

2. Cisco DCNM is designed to work with Cisco Fabric Manager.

3. Cisco DCNM generates alerts when it detects an issue that may negatively affect service.

4. Cisco DCNM is designed for enterprise customers only to increase network uptime.

5. Cisco DCNM Essentials Edition is capable of VM-aware monitoring, which reduces administrative overhead.

Answer: A,C

Question No: 166 – (Topic 1)

Which three features are part of Cisco DCNM for SAN Advanced Edition? (Choose three.)

1. federation and VSAN scoping

2. VM-aware discovery and path analysis

3. fabric performance monitoring

4. event lookup

5. VSAN zoning

Answer: A,B,C

Question No: 167 – (Topic 1)

Which two views from the Device Manager in Cisco Prime Data Center Network Manager provide a graphical view of Cisco devices? (Choose two.)

1. Device

2. Configuration

3. Log

4. Ports

5. Summary

Answer: A,E

Question No: 168 – (Topic 1)

Which two devices should you recommend to implement at the ToR in your data center design for access layer connectivity? (Choose two.)

1. Cisco Nexus 2000 Series

2. Cisco Nexus 3000 Series

3. Cisco Nexus 4000 Series

4. Cisco Nexus 5500 Series

5. Cisco Nexus 7000 Series

Answer: A,D

Question No: 169 – (Topic 1)

Which statement about the Cisco Adapter FEX feature on the Cisco Nexus 5000 Series Switches is true?

1. Cisco Adapter FEX is a software feature that can be configured on any Cisco Network Assistant as long as the Nexus 5000 is running a version of code that supports Adapter FEX.

2. Packets on each channel are tagged with an 801.Q header that has a specific source VIF.

3. Cisco Adapter FEX can be thought of as a way to divide a single physical link into multiple virtual links or channels.

4. When using a dual-homed NIC on the server, active/standby is not supported. Only active/active is supported.

Answer: C

Question No: 170 – (Topic 1)

Which two options are reasons to use IP routing to segment a data center instead of Layer 2 routing? (Choose two.)

1. Spanning Tree Protocol

2. simplify design

3. broadcast flooding

4. ease of routing protocol configuration

5. cost

Answer: A,C

100% Dumps4cert Free Download!
–300-160 PDF
100% Dumps4cert Pass Guaranteed!
–300-160 Dumps

	Dumps4cert	ExamCollection	Testking
Lowest Price Guarantee	Yes	No	No
Up-to-Dated	Yes	No	No
Real Questions	Yes	No	No
Explanation	Yes	No	No
PDF VCE	Yes	No	No
Free VCE Simulator	Yes	No	No
Instant Download	Yes	No	No