[Free] 2018(Aug) Ensurepass Microsoft 70-743 Dumps with VCE and PDF 31-40

Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Microsoft Official New Released 70-743
100% Free Download! 100% Pass Guaranteed!

Upgrading Your Skills to MCSA: Windows Server 2016

Question No: 31

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration

Ensurepass 2018 PDF and VCE

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4.

Server1 must resolve queries from all other DNS clients.

Solution: From Windows PowerShell on Server1, you run the Export- DnsServerDnsSecPublicKey cmdlet.

Does this meet the goal?

  1. Yes

  2. No

Answer: B

Question No: 32 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.

You install IP Address Management (IPAM) on Server1. You select the automatic provisioning method, and then you specify a prefix of IPAM1.

You need to configure the environment for automatic IPAM provisioning.

Which cmdlet should you run? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 33

You have a server named Server1.

You enable BitLocker Drive Encryption (BitLocker) on Server1.

You need to change the password for the Trusted Platform Module (TPM) chip. What should you run on Server1?

  1. Initialize-Tpm

  2. Import-TpmOwnerAuth

  3. repair-bde.exe

  4. bdehdcfg-exe

Answer: B

Question No: 34 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2, Server3, and Server 4 have the DHCP Server role installed. IPAM manages Server2, Server3, and Server4.

A domain user named User1 is a member of the groups shown in the following table.

Ensurepass 2018 PDF and VCE

Which actions can User1 perform? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Box 1: Can be performed by User1

DHCP Administrators can create DHCP scopes. Box 2: Cannot be performed by User1

DHCP Users cannot create scopes. Box 3: Cannot be performed by User1 IPAM users cannot creates copes.

References: https://technet.microsoft.com/en- us/library/dn741281(v=ws.11).aspx#create_access_scope

Question No: 35 DRAG DROP

Your network contains two Hyper-V servers named Server1 and Server2. Server1 has Windows 2012 R2 installed. Server2 has Windows Server 2016 installed.

You perform a live migration of a virtual machine named VM1 from Server1 to Server2. You need to create a production checkpoint for VM1 on Server2.

What three Windows PowerShell cmdlets should you run in sequence? To answer, move

the appropriate cmdlets from the list of actions to the answer area and arrange them in the correct order.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

We need to update the VM Version to enable the Production Checkpoints feature.

Step 1: Stop-VM

The virtual machine should be shut down before upgrading it. Step 2. Update-VMVersion

To upgrade the virtual machine configuration version by using Windows PowerShell, use the Update-VMVersion cmdlet.

Step 3: CheckPoint-VM

The Checkpoint-VM cmdlet creates a checkpoint of a virtual machine. Note: There is no Upgrade-VMVersion cmdlet

Question No: 36

You have a Hyper-V host that runs Windows Server 2016. The host contains a virtual machine named VM1. VM1 has resource metering enabled.

You need to use resource metering to track the amount of network traffic that VM1 sends to the 10.0.0.0/8 network.

Which cmdlet should you run?

  1. New-VMResourcePool

  2. Set-VMNetworkAdapter

  3. Add-VMNetworkAdapterAcl

  4. Set-VMNetworkAdapterRoutingDomainMapping

Answer: C Explanation:

References:

https://technet.microsoft.com/itpro/powershell/windows/hyper-v/add-vmnetworkadapteracl

Question No: 37 HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016.

Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.

You create a domain user account named User1.

You need to ensure that User1 can use IPAM to manage DHCP.

Which command should you run on Server1? To answer, select the appropriate options in the answer area.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 38 HOTSPOT

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host.

You run the commands shown in the following graphic:

Ensurepass 2018 PDF and VCE

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Question No: 39 DRAG DROP

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.

You install IP Address Management (IPAM) on Server1.

You need to manually start discovery of servers that IPAM can manage in contoso.com.

Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Ensurepass 2018 PDF and VCE

Answer:

Ensurepass 2018 PDF and VCE

Explanation:

Ensurepass 2018 PDF and VCE

Step 1: Invoke-IpamServerProvisioning Choose a provisioning method

The Invoke-IpamGpoProvisioning cmdlet creates and links three group policies specified in the Domain parameter for provisioningrequired access settingson the server roles managed by the computer running the IP Address Management (IPAM) server.

Step 2: Add-IpamDiscoveryDomain Configure the scope of discovery

The Add-IpamDiscoveryDomain cmdlet adds an Active Directory discovery domain for an IP AddressManagement (IPAM) server. A discovery domain is a domain that IPAM searches to find infrastructure servers. An IPAM server uses the list of discovery domains to determine what type of servers to add. By default, IPAM discovers all domain controllers, Dynamic Host Configuration Protocol (DHCP) servers, and Domain Name System (DNS) servers.

Step 3: Start-ScheduledTask Start server discovery

To begin discovering servers on the network, click Start server discovery to launch the IPAM ServerDiscovery task or use the Start-ScheduledTask command.

Question No: 40

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016. All domain controllers run Windows Server 2012 R2.

Contoso.com has the following configuration:

Ensurepass 2018 PDF and VCE

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.

You need to configure Active Directory to support the planned deployment. Solution: You run adprep.exe from the Windows Server 2016 installation media. Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

Device registration requires a forest functional level of Windows Server 2012 R2.

New installations of AD FS 2016 require the Active Directory 2016 schema (minimum version 85).

References:

https://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx https://technet.microsoft.com/en-us/windows-server-docs/identity/ad- fs/operations/configure-device-based-conditional-access-on-premises

100% Ensurepass Free Download!
Download Free Demo:70-743 Demo PDF
100% Ensurepass Free Guaranteed!
70-743 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *